Thin Panel Hinge, Grade 1, Screw Mounted

Aximat® 300

Art. no. 344.75.730

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available

Note:
To receive items as fast as possible, choose 'when available' at checkout.

Piece Min. 1
Add to cart

Looks like you don't have permission to add this product to your cart. Kindly get in touch with your sales representative for assistance.

Your search for null returned no results.

Thin Panel Hinge, Grade 1, Screw Mounted

Aximat® 300

  • see key

    Door Overlay Adjustment Turn screw A to adjust the overlay in both directions.
    Height Adjustment Loosen screws B .Activate the height adjustment by pushing with screwdriver into window C moving tab away, adjust ±2 mm by turning screwdriver. Re-tighten screws.
    Depth Adjustment Loosen special screws D and E , adjust manually in the prolonged hole. Security screw E can be installed at any time, 3D adjustment is still available.

  • Drilling pattern for door

  • Drilling pattern for side panel

  • see key

    Number of hinges per door
    The values in the diagram are sample measurements for doors up to 600 mm wide.
    With doors widths less than 400 mm, the minimum gap must be determined by trial mounting.
    The door’s width must not exceed its height.
    The distance between door edge and uppermost / lowermost hinge should be no more than 100 mm.
    In case of heavy loads and high leverage force, an additional hinge (dim. X max. 100 mm) mounted below the top hinge is recommended.

Note: Product may not be exactly as shown

Filter

Complete your selection

Article details

Ideal for MRI rooms and outdoor use
Increased protection against corrosion
Maximum project quality in compliance with ANSI grade 1 (100,000 cycles)

Version

Door overlay: 7.0 mm
Full overlay mounting: Side panel thickness 13 mm
Half overlay mounting: Side panel thickness 19 mm

Colour/finish

matt

Mounting

screw fixing

For door material

Wood, Laminate, Metal

Concealed hinge version

Full overlay/half overlay mounting

Opening angle

270 °

Suitable for

Thin doors, for metal/wood materials and laminated panels (HPL)

Material

Stainless steel, Hinge arm: Stainless steel

Installation

For screw fixing

Adjustment facility

Side adjustment facility: -2 – 1 mm, Height adjustment facility: ±2 mm, Depth adjustment facility: ±1 mm, Height adjustment in cup part Depth adjustment via horizontal slots in side component

Cup drilling depth

21 mm

Door overlay

7 mm

Supplied with

Hinge
Fixing material (stainless steel self-tapping screws)
1 twist drill bit ⌀3.3 mm, 20 pieces per packing unit

Related products and accessories
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
25-May-2022