To support the opening bed
For use with Foldaway Fitting Bed Sets 271.95.204 and 271.95.203
When opening the bed, the angular feet must be extracted, turned by 90º and retracted to the stop
The angular feet with mounting plate are screw-mounted to the foot side of the bed frame and and to the inside of the front panel.
A minimum of 1 9/16” x 1 9/16” (40mm x 40mm) square beam is needed on four sides as a slatted frame support.
Mounting plate: Black, RAL 9011
Angular bracket: White aluminium, RAL 9006, Aluminum (Powder-Coated)
for supporting the open bed
When opening the bed, the angular feet must be
extracted, turned by 90º and retracted to the stop
Screw the mounting plate of the angular bracket to the foot of the bed frame and the rear of the front panel. Attach squared timber measuring at least 40 x 40 mm surrounding the frame for the slatted frame support.
Screw mounting plate of the angular bracket to the foot of the bed frame and the rear of the front panel. Attach squared timber measuring at least 40 x 40 mm surrounding the frame for the slatted frame support.