- Accueil
- Produits
- Ferrures de meuble & solutions pour l’habitat
- Charnières
- Charnière à corps, Duomatic 110°, pour montants longs

Charnière à corps, Duomatic 110°, pour montants longs











- Duomatic – Schéma de perçage et dimensions de construction
Konstruktionsmaße
Eckanschlag | Mittel-/Zwillingsanschlag | Innenanschlag | ||
![]() | ![]() | ![]() |
A | Gelenkarmlänge |
B | Gelenkarmhöhe |
C | Türeinsprung |
D | Distanz (Montageplatte) |
E | Topfabstand |
F | Fuge |
G | Türaufschlag |
J | Materialdicke |
K | Topfaufschlag |
L | Mindestabstand |
Topfmaße
Duomatic Topfscharniere | Duomatic für Profiltüren |
![]() | ![]() |
Bohrbilder für Topfbefestigung Häfele Duomatic
zum Schrauben | ||
![]() | ![]() | ![]() |
Bohrbild 45/9,5 | Bohrbild 48/6 | Bohrbild 52/5,5 |
zum Einpressen | zum Eindrücken | werkzeuglos |
![]() | ![]() | ![]() |
Bohrbild 45/9,5 | Bohrbild 48/6 | Bohrbild 52/5,5 |
Die erforderliche Bohrtiefe der 35-mm-Bohrung finden Sie auf den jeweiligen Produktseiten.
Auswahl der Montageplatten
Die unterschiedlichen Distanzhöhen der Montageplatten ermöglichen die Änderungen des Türaufschlages.Ausgangspunkt für die Ermittlung der erforderlichen Distanz ist die gewünschte Anschlagart mit definiertem Türaufschlag.
Berechnungsbeispiel: Montageplatte (Distanz) | ||
Anschlagart und Fuge F festlegen | Türaufschlag G berechnen | |
![]() | ![]() | |
z. B. Eckanschlag mit Fuge F = 5 mm | Türaufschlag G = Holzdicke J – Fuge F z. B. 20 – 5 = 15 mm |
Topfabstand E und Distanz ablesen | ||||||||||
Türaufschlag mm | ||||||||||
9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | |
– | – | – | – | – | – | – | – | – | 3 | 0 |
– | – | – | – | – | – | 3 | 4 | 5 | 6 | 3 |
– | – | – | 3 | 4 | 5 | 6 | 7 | 8 | – | 6 |
3 | 4 | 5 | 6 | 7 | 8 | – | – | – | – | 9 |
Topfabstand E mm | Montageplatte Distanz mm | |||||||||
Im Beispiel ist der Türaufschlag G mit 15 mm festgelegt, daraus ergeben sich die Topfabstände 3 und 6 mm. Bei gewählten 6 mm Topfabstand E bedeutet dies ein Montageplattenhöhe (Distanz) von 6 mm. |
-
Liens disponibles du catalogue
Veuillez sélectionner un article.
Filter
Complete your selection

Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263 Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com |

Charnière à corps, Duomatic 110°, pour montants longs











Information : La figure montre un article similaire, si disponible
Information
Veuillez sélectionner un article via les caractéristiques ou le tableau des articles pour le placer dans le panier.